The Humidifier or Atomizer Explained

The mister is controlled entirely by the series III controller and mister in one. Previous series used a black box controller. If you want to test that it works, just plug the USB plug into your computer (after filling it with 200ml distilled water) and it will run uninterrupted. Please ignore the push button switch, it is for future use but for now is disabled. It serves no purpose right now. We have designed the mister to only get commands from the controller when the humidity level in the fridge falls below 60%. It will then activate and add moisture to the envelope for 10 seconds. It will recalculate the humidity levels every minute and the algorithm will decide on the trend in dew to add further moisture or remain off if enough moisture has been added. We also programmed the controller to check on water levels and diagnostics once every 24 hours to ensure proper working conditions are present.

The LED blinking is as follows:

– short red blink means that the controller get ready to download information through your wifi;
– short green (repeated) blinks show that the information is being downloaded correctly;